The m4 series of suppressor of all manufactured of various grades of titanium and an space age alloy to create a blast chamber that we have never seen wear out. It is available in a series of different configurations, two different lengths and three different colors. Also available are two different mounting solutions and some utilizing both. This allows for a fast attach system that maintains the utmost accuracy for your bolt guns and longer barreled ar and variants, while also allowing an attachment system that takes less than 30 seconds to install on any a2 standard flash hider. This arrangement is capable of being fired on anything from a 22 rifle with an a2 flash hider all the way to a 6.8 spc rifle. Making this the most versatile suppressor on the market today. One suppressor able to do what this does is unheard of.

The M4LXK is the standard length suppressor with both mounting systems and a flash hider, standard ½ x 28 thread. 8.25 inches long, 1.5 inches in diameter 7 inches added to overall length. As with all of our m4 series of suppressors, this unit is rated for full auto fire. Available in three colors, unfinished, desert tan and black. All colors are ceramic coated purported to withstand 1600+ degrees. $1350

The M43LX is a 3lug system requiring the use of our flash suppressor and up gradable to the M4LXK with the purchase of an adapter. It is also the same suppressor as the M4LXK. 8.25 inches long, 1.5 inches in diameter 7 inches added to overall length. As with all of our m4 series of suppressors, this unit is rated for full auto fire. Available in three colors, unfinished, desert tan and black. All colors are ceramic coated purported to withstand 1600+ degrees. $1275.00

The M4A2X suppressor uses the standard a2 mounting system allowing it to be converted to a 3 lug with the purchase of an adapter. It is the same suppressor as the M4LXK system. 8.25 inches long, 1.5 inches in diameter 7 inches added to overall length. As with all of our m4 series of suppressors, this unit is rated for full auto fire. Available in three colors, unfinished, desert tan and black. All colors are ceramic coated purported to withstand 1600+ degrees. $1200.00

The A2CPL is the coupler to convert the m4lx to a m4lxk . $75.00

The 3LCKL is the kit required to convert a M4A2X to an M4LXK, it includes one flash suppressor and required coupler. $150.00

The 3LFH is for the fast attach flash suppressors. $75.00

The 3LCPL is to convert the M4A2X suppressor to a M4LXK suppressor WITHOUT the required flash hider. $75.00

We now also offer the TACM4 series of suppressors, all the same model numbers just with a tac denomination in front with all the same options and all the same price. So the full kit would be TACM4LXK ($1350.00), just the quick attach setup with our flash hider would be TACM4LX ($1275.00) and the suppressor with standard a2 mounting coupler would be TACM4A2 ($1200.00). (All of the accessories stay the same so no tac prior to them. they are compatible with older couplers from the m4a2 models but not the dedicated 3 lug versions.) These are what we currently supply to certain factions of the U.S. military (God bless our troops!) Just about 1.48 inches shorter and will be lighter. Bringing the total length to around 7.25 inches, the diameter stays the same at 1.5 inches But now only adds about 5.5 inches to the total length of the firearm. As with all of our m4 series of suppressors, this unit is rated for full auto fire. All suppressors are available in three colors, unfinished, desert tan and black. All colors are ceramic coated purported to withstand 1600+ degrees.

We offer two types of .22 caliber tubes. One is titanium and the other is aluminum. The shorter one made from titanium, is a wet style and the other being a dry tube. The four inch tube is a wet tube requiring some sort of lubricant, we use grease (it lasts longer) but water works very well also. The dry tube is about 6 inches long but does not require any lubricant and uses aluminum with stainless steel thread inserts to prevent wear associated with recoil and installation. These are shown on a pistol but actually are even more effective on a rifle, allowing for more room for the gasses to expand in the barrel, creating a very impressive signature when fired. You really have to hear to believe (or not hear).

The 6 inch aluminum tubes M22 as retail for $475.00 while the shorter titanium tube M22TW retails for the same price, $475.00. All suppressors are available in three colors, unfinished, desert tan and black. All colors are ceramic coated purported to withstand 1600+ degrees.

We offer an in barrel suppressor for the Ruger 10/22 and Ruger 77/22 that features a one piece Titanium insert. Perfectly installed in a commercially available .920 heavy barrel. We precisely counterbore the barrel and mate our suppressor flawlessly inside. This allows for the profile to remain the same as a heavy barreled 22 rifle and no one is the wiser, that is until you pull the trigger. The standard heavy barrel is counterbored then threaded and a titanium insert is fashioned installed into the barrel. A tool for removal is included, for cleaning the barrel and for cleaning the insert as an added benefit. Currently this product is available for the ruger 10/22 and the 77/22 rifles only. The price is $725.00 each for the ruger 10/22 model number is R22ISM and the 77/22 is R77ISM.